User's Manual

Professional FM Transceiver
26
How to operate
25
Priority scan function (PRI-SC) ---- MENU 20
When the transceiver is in non-priority frequencymode, it still check activity of the priority channel, once
there has an action at priority channel, the transceiver will auto work in the priority channel.
In frequencymode, press + number and the screen will display
Press enter, arrowhead aim at "OFF" position, press / to turn on or turn off.
Press to confirm, then press to return to standby.
2
0
Adding channelscan (SC-ADD) ---- MENU 19
This function ensure that whether frequency or channel be added to scan list or not.
In frequencymode, press + number and the screen will display
Press enter, arrowhead aim at "ON" position, press / and select ON or OFF.
Press to confirm, then press to return to standby.
9
ABR
NOTE
!
This transceiver priority scan channel from 0 to 199 can selectable.
There is only dispaly a "S" on LCD screen, that means radio has startup priority channel scan.
Startup priority channel scan function needs two conditions:
1. Do priority channel scan switch on. 2. This function scan the channel which has been stored.
In frequencymode, channelmode or scanning, when transceiver detects a signal, it will transfer the priority
channel, after the signal disappeared 3 seconds if you don't do any operation, transceiver will back to
frequency and go on priority scan.
The speed of startup or resume priority scan is relative to the setting backlight. When if the backlight be set
as "1", then the speed of startup or resume priority scan will be the fastest.
When the priority channel which has been set parameter receive signal, if with the same frequency, then
radio can transfer the priority channel.
The transfered priority channel only be used to communcation, you can't do any other operation until radio
resumes frequency.
Setting priority channel scan function (PRI-CH) ---- MENU 21
This function means any channel which has been programmed can be set as priority scan channel.
In frequencymode, press + number and the screen will display
Press enter, arrowhead aim at "CH-000" position, press / select the desired channel.
Press to confirm, then press to return to standby.
2