User's Manual

Professional FM Transceiver
24
How to operate
23
NOTE
!
When MENU 14 is switched on, the voice guide gets priority.
Setting beepprompt function (BEEP) ---- MENU 15
Beepprompt is to tell you if the transceiver is operating well or has a malfunction.
We kindly advice you to switch on this function.
This function will inform you for any possible malfunction.
In standby, press + number and the screen will display
Press enter, arrowhead aim at "ON" then press / to switch on the beep or OFF when you
want to switch off the beep. Press to confirm, then press to return to standby.
5
Busy channel lockout (BCL) ---- MENU 18
This function is to prevent that interfere others who is on communicating. If the channel you have
selected which is using by other radio, at this time press PTT key, you can not transmit.
In frequencymode, press + number and the screen will display
Press enter, arrowhead aim at "OFF" position, press / and select between ON or OFF.
Press to confirm, then press to return to standby.
8
Setting DTMF sidetone (DTMFST) ---- MENU 16
DTMF sidetone gives you the opportunity to switch on or off the speaker when transmit DTMF.
The transceiver has 4 different options.
KEY: Switch on sidekey when transmitting.
ANI: Switch on the ANI sidetone when transmitting.
BOTH: Sidekey and ANI are both on.
OFF: Turn off all.
In standby, press + number and the screen will display
Press enter, arrowhead aim at "BOTH" position, press / and select one function of KEY/
ANI/BOTH/OFF. Press to confirm, then press to return to standby.
6
Setting transmit overtime alarm (TOA) ---- MENU 17
Transmit overtime alarm is the setting to alarm the user that he/she has reached the preset time and a
voiceprompt and light will flicker during transmit.
The transceiver can be set from 1 to 10 TOA in steps of 1 second.
In standby, press + number and the screen will display
Press enter, arrowhead aim at "5" position, press / to select OFF or to set 1 to 10 for the
overtime alarm. Press to confirm, then press to return to standby.
7