User's Manual

Professional FM Transceiver

How to operate

NOTE

This transceiver has 105 groups different DCS codes, see appendix (2) DCS frequency sheet. And DxxxN

means positive code, DxxxI means negative code. The range of positive code is between D023N and D754N,

negative code is between D023I and D754I.

Setting receive DCS (R-DCS) ---- MENU 11

In frequencymode, press + number and the screen will display

Press enter, arrowhead aim at "OFF" position, press / and select OFF to switch off DCS or

one of the steps from D023N to D754I. Press to confirm, then press to return to standby.

NOTE

This transceiver has 50 groups different CTCSS tones, see appendix (1) CTCSS frequency sheet.

Setting transmit CTCSS (T-CTCS) ---- MENU 12

In standby, press + number and the screen will display

Press enter, arrowhead aim at "OFF" position, press / and select OFF to switch off CTCSS

or use one of the tones between 67Hz and 254.1Hz. Press to confirm, then press to return

to standby.

NOTE

This transceiver has 105 groups different DCS codes, see appendix (2) DCS frequency sheet. And DxxxN

means positive code, DxxxI means negative code. The range of positive code is between D023N and D754N,

negative code is between D023I and D754I.

Setting transmit DCS (T-DCS) ---- MENU 13

In frequencymode, press + number and the screen will display

Press enter, arrowhead aim at "OFF" position, press / and select OFF to switch off DCS or

one of the steps from D023N to D754I. Press to confirm, then press to return to standby.

NOTE

If want to turn off all keypad voiceguide should turn off MENU15 and MENU14.

Setting voiceguide (VOICE) ---- MENU 14

In standby, press + number and the screen will display

Press enter, arrowhead aim at "ENG", press / key to either select English or OFF to switch

off the voiceguide. Press to confirm, then press to return to standby.