User's Manual

How to operate

Professional FM Transceiver

Setting batterypack savemode (SAVE)--- MENU3

In standby, press + number and the screen will display

Press enter, arrowhead aim at "OFF" position, press / select one of 1:1/ 1:2/1:3/1:4/OFF.

Press to confirm, then press to return to standby.

1:1/1:2/1:3/1:4 means the radio receive circuit turn on and off pulse ratio.

NOTE

This transmitpower has 10 levels can be selected, this means it will higher and higher from 1 to 10.

High/Low power can be changed during transmit. Press PTT key and topkey at the same time, this will change

High/Low power.

Selecting transmitpower (TXP)--- MENU4

In frequencymode, press + number and the screen will display

Press enter, arrowhead aim at "1" position, press / and select the desired powerlevel.

Press to confirm, then press to return to standby.

NOTE

To ensure effective communications the radio's must be set to the same voice encrypt.

SCR: Use the scrambler, it can encrypt the communication and make the transceiver who does not use

the scrambler can't hear clear what you are talking, meanwhile you also can't hear clear others, what

they are talking who does not use the scrambler.

In standby, press + number and the screen will display

Press enter, arrowhead aim at "OFF" position, press / and select OFF to switch off this

function or ON to turn on SCR. Press to confirm, then press to return to standby.

Setting voice encrypt compress (SCR)--- MENU 5

Transmit over timer (TOT) ---- MENU 6

The TOT is designed to prevent your radio to transmit too long. When the transceiver is exceeding the

preset time limit it will stop transmitting and give you a warning signal.

This transceiver can be set in 40 steps of 15 seconds, between 15 and 600 seconds.

In standby, press + and the screen will display

Press enter, arrowhead aim at "60" and press / to select the level you need when on transmit.

Press to confirm, then press to return to standby.