User's Manual

How to operate

Professional FM Transceiver

NOTE

transmit CTCSS and DCS, optional signal, channel bandwidth, encoding signal, mutemode,PTT transmit, voice

encrypt compress, busy channellockout, companding and adding channelscan.

In channelmode the next three settings are not available to change on A/B segment: channel step, frequency-

shift direction, offsetfrequency.

In channelmode setting voice encrypt compress is available to change A/B segment.

NOTE

Standby time is set by auto-backlight. (See MENU 9)

In standby, press and number and the screen will display

Press enter, arrowhead aim at "ON" position, press / select ON turn on dualstandby or

OFF turn off dualstandby. Press to confirm, then press to return to standby.

NOTE

In frequencymode you have thirteen different settings to choose from channel step, transmit output power,

voice encrypt compress, bandwidth,receive CTCSS and DCS, transmit CTCSS and DCS, optional signal, signal

encode, mutemode, frequencyshift direction, offsetfrequency on A/B.

In channelmode the next setting are not available to change: transmit output power, receive CTCSS and DCS,

Setting channel step (STEP) ---- MENU 1

In standby, press and number and the screen will display

Press enter, arrowhead aim at "5.00" and press / to select the channel step you desired.

Press to confirm, then press to return to standby.

This transceiver has the option of 5KHz, 6.25KHz, 10KHz, 12.5KHz and 25KHz steps.

NOTE

This transceiver has steps from 0-9, which step 0 is always open squelch. From 1 to 9 gives different levels of

noise reduction.

Setting squelch level (SQL-LE ) --- MENU 2

Select the level of squelch so that you will have no difficulty receiving the desired signal. When you set

the level too high you will loose communication in a fringe area.

In standby, press + number and the screen will display

Press enter, arrowhead aim at "5" position by going / to select the desired squelch.

Press to confirm, then press to return to standby.