User's Manual

NOTE
!
The KG-699E has dualfrequency display. In frequencymode it will display two different transmit and receive
frequency at the same time. In channelmode it will display the two different channels plus their parameters.
In frequency and channelmode you can switch to A and B segment by pressing the topkey left above the LCD.
Lock menu functions
If you don't need operate menu functions frequently, you can turn off it by KG-699E programming
software. The steps as following:
1. Set password of switching between channelmode and frequencymode.
2. Set workmode as channelmode.
3. Turn off operating menu function in channelmode.
When you want to use menu functions, input password which you have set, and switch to frequencymode,
then you can operate it.
Setting dualstandby (TDR) --- MENU O
This menu is to turn on/off dualstandby. When it is switched to ON, the radio will start standby between
A and B including their set parameters. Any channel or frequency has been received,then system will stay
on corresponding channel or frequency, until channel or frequency signal disappear.
Once signal has disappeared, system will return to standby and start to flicker "TDR".
Shortcut operation sheet
13
P46
-47
Select parameter
Press or key
44 Setting
memory channel
45 Delete
channel
46 Frequencyshift
direction
47 Offset
frequency
50 Setting
VOX-T
51 Setting
Companding
52 Setting
reset
P48
P48
P48
-50
P50
-51
P51
P51
-52
+: Positive offset
-: Negative offset.
OFF: Turn off frequencyshift
direction
From 0 to 99.950MHz can
be selectable
Total has 20 levels
Unit: 100ms
ON: Turn on COMP
OFF: Turn off COMP
VFO: Menu reset
ALL: All message reset
200 channels
200 channels
48 ANI CODE
edit (ANI)
P50
From 0 to 99.950MHz can
be selectable
Set by programming
software
4
5
5
5
4
4
4
4
0
2
8
7
5
6
4
Select parameter
Press or key
Select parameter
Press or key
Select parameter
Press or key
Select parameter
Press or key
Select parameter
Press or key
Select parameter
Press or key
Select parameter
Press or key
EXIT
EXIT
EXIT
EXIT
EXIT
EXIT
EXIT
EXIT
Setting reverse frequency function (See page 52)
All calls, group calls and selective calls
(See page 28-30)
High/Low power changeable when on
transmitting(See page 17)
Lowvoltage batterypack voiceprompt (See page 53)
Wireclone function(See page 53)
Adding channelscan (See page 53)
Programming repeater function (See page 54-55)
Speed search / (See page 7)
DOWN
UP
14
Professional FM Transceiver
How to operate