Technical Specs

4 5

Install/ Remove battery pack
To install the battery pack, fit the extensions at the
bottom of the battery into the slots at the bottom if
the transceiver’s body. Press the top part of the bat-
tery towards the transceiver until a cracking sounds
is heared.
To remove the battery pack, Slide the battery released
latch in the top middle of the battery, downwards.
Pull the top part of battery away from the transceiv-
er’s body, and lift the battery from the transceiver’s
body.

Install the Belt Clip
If necessary, use the supplied screws to install the
belt clip at the back of battery pack.

Earphones jack/Computer programming
Can you computer program software to operate.
(Programming soft-ware pls consulting with the local
dealers)

Keyboard
For related functions
operation.
WORKING MODE

CH Mode (Channels mode)
In this mode, you can use [
Y
], [
Z
] button to change
channel no., or use keyboard to input the number of
channels you need.
You must program at least one memory channel,
otherwise you can’t enter this CH Mode.
Press [
] button to enter Menu, then [
Y
], [
Z
] press
to make a selection. Menu options operation can be
performed. More details Pls see the “menu” for oper-
ation.

The radio mode
In this mode, you can use [
Y
], [
Z
] button to change
radio frquencies or channels. After entering the FM
radio mode, Press [
] button to switch the radio fre-
quency/channel mode.
In FM radio Frequency mode, long press [
] button,
Can scan radio stations and save.
In FM radio Channel mode, long press [
] Can scan
radio channel or frequency.