User Manual

5. Select“futabaPPM”foroption2. 

Ifthesimulatorcablewasmadebyusersthemselves,connectthetwo
wiresoftheaudioplugwiththePPMconnectorofWINDBOX. 
Thesignalwireinthemiddleoftheaudioplugofthesimulatorcable  
<—>PPMpinofthePPMconnectorofWINDBOX
Thegroundingwireattheedgeoftheaudioplugofthesimulator
cable  <—>GNDpinofthePPMconnectorofWINDBOX


5.19 LowBatteryAlarmSetting

z Option1:selectalarmvoltage.Ifthevoltageislowerthanthis
value,thebuzzerwillalarm.If2Slithiumbatteryisused,pleaseset
thisvalueto7v.If3Slithiumbatteryisused,pleasesetthevalue
to10.8v;
z Option2:selectthetypeofbattery; 
34