User Manual

29
●Option1:joystickdisplaymenu.Clickittoentersub-menutoviewthe
axisnamesofthejoystick;  
●Option2:selectthenameoftargetedaxisoftheUSBjoystick; 
●Option3:selectthechannelnumbertobemappedtothetargeted
axis. 

Forexample:formappingtheleftandrightdirectionaxisofjoystick
tochannel1,
 1.Clickoption1toenterjoystickdisplaysub-menu.Pullthejoystick
leftwardsandrightwards,thenwecanfindtheindicatingrodforRX
axisisalsomovingleftwardandrightwards.Thenthenameoftheaxis
ofthejoystickisRX. 
2. Select“RX”foroption2; 
3. Select“CH1”foroption3;
4. ThentheRXaxisofthejoystickissuccessfullymappedtoCH1.

5.15 CanceltheMappingoftheaxisofJoystick
 Thesystemalreadymappedallthelinearaxisofthejoystickto
channels.Butsometimes,wewanttousebuttontocontrolthese
channels,forexample,mappingathree-segmentswitchwitha
channel.Then,wehavetocancelpreviousmappingforaxis.