User Manual

LEA-6 - Data Sheet
GPS.G6-HW-09004-E2 Page 23 of 26
7 Default settings
Interface Settings
Serial Port 1 Output 9600 Baud, 8 bits, no parity bit, 1 stop bit.
Configured to transmit both NMEA and UBX protocols, but only following NMEA and no
UBX messages have been activated at start-up:
GGA, GLL, GSA, GSV, RMC, VTG, TXT
(in addition to the 6 standard NMEA messages the LEA-6T includes ZDA).
USB Output Configured to transmit both NMEA and UBX protocols, but only following NMEA and no
UBX messages have been activated at start-up:
GGA, GLL, GSA, GSV, RMC, VTG, TXT
USB Power Mode: Bus-Powered.
(in addition to the 6 standard NMEA messages the LEA-6T includes ZDA).
Serial Port 1 Input 9600 Baud, 8 bits, no parity bit, 1 stop bit
Automatically accepts following protocols without need of explicit configuration:
UBX, NMEA
The GPS receiver supports interleaved UBX and NMEA messages.
USB Input Automatically accepts following protocols without need of explicit configuration:
UBX, NMEA
The GPS receiver supports interleaved UBX and NMEA messages.
USB Power Mode: Bus-Powered.
TIMEPULSE
(1Hz Nav)
1 pulse per second, synchronized at rising edge, pulse length 100ms.
Power Mode Maximum Performance mode, except LEA-6R which is in ECO mode.
AssistNow
Autonomous
Disabled.
Table 16: Available Protocols.
Refer to the LEA-6/NEO-6/MAX-6 Hardware Integration Manual [1] for information about further settings.