User Manual

Naviagation (N1-N4)
Date/Time Page (N1)
The Date/Time Page shows UTC date and time. “F” letter indicates valid fixed data.
If the data is invalid this screen will be shown. “U” letter indicates invalid unfixed data.
Position Page (N2)
The Position Page shows logger current position: latitude, longitude and quantity of fixed
GPS satellites (12). If the data is invalid this screen will be shown.
Course/Speed (N3)
The Course/Speed page shows logger current course (COG) and speed.
If the data is invalid this screen will be shown.
Exit Page (N4)
The Exit Page allows you to exit to the Main Menu or go back to the Date/Time Page.
Press ENTER to exit or MENU to back to the N1 page.
Date 01/01/13 N1
Time 11:15:10 F
COG 001.0 N3
Speed 002.3 km/h
Exit to Menu? N4
[ENTER]
N 22 31 15.9 N2
E113 23”22.11 12
”
- -- N2
--
”
-- --.-
----
”
-- --.-
Date --/--/-- N1
Time --:--:-- U
COG --.- N3
Speed ---.- km/h
Logging (L1-L3)
Logging Time (L1)
Shows current logging time. The screen backlight will turn off within 15 seconds to save energy.
Press MENU to turn the backlight on. Note: RC signal less than 720us will turn off logging mode,
save the information and exit to Main Menu.
Exit Page (L2)
RC signal more than 720us will turn on logging
Logging... L1
Time 000:00:04
Save & Exit? L2
[ENTER]