User Manual

ManualsBrandsQuanum ManualsHobbyGPS Logger V2 with Backlit LCD Display NEO-6 U-Blox

Overview

Main Menu (M1-M4)

Navigation (M1)

The Navigation Page shows UTC date and time, logger current position, course and speed.

Logging (M2)

logger

View Data (M3)

Shows logger start and end position, distance, total time, maximum speed and course.

PC Connect (M4)

Allows you to connect to PC (thru NMEA mode).

Logging distance, total time, start and end position, course and maximum speed.

Note: RC signal more than 1520us will turn on logging mode.

>Navigation M1

Logging

Navigation M2

>Logging

>View data M3

PC Connect

View data M4

>PC Connect

Searching...

P&H MENU to exit

Search Failed!

Success!

After turning on the logger the screen with information about firmware version and model

number will appear. After it the searching screen will appear.

Searching takes about 3 minutes depending on satellite quantity and surrounding conditions.

If you don't want to wait for the search results press and hold MENU button. Depending on the the

searching result one of the following screens will appear. After it the logger will go to Main Menu.

Note: after the logger finds the satellites it is better to leave it in a motionless position for

up to 3-10 minutes for better working results. Never try using the logger indoors.

Getting Started

Summary of content (4 pages)

PAGE 1
Overview Getting Started After turning on the logger the screen with information about firmware version and model number will appear. After it the searching screen will appear. Searching... P&H MENU to exit Searching takes about 3 minutes depending on satellite quantity and surrounding conditions. If you don't want to wait for the search results press and hold MENU button. Depending on the the searching result one of the following screens will appear. After it the logger will go to Main Menu.
PAGE 2
Naviagation (N1-N4) Date/Time Page (N1) Date 01/01/13 N1 Time 11:15:10 F The Date/Time Page shows UTC date and time. “F” letter indicates valid fixed data. If the data is invalid this screen will be shown. “U” letter indicates invalid unfixed data. Date --/--/-- N1 Time --:--:-- U Position Page (N2) N 22 31”15.9 N2 E113 23”22.11 12 The Position Page shows logger current position: latitude, longitude and quantity of fixed GPS satellites (12). If the data is invalid this screen will be shown. - -- --”--.
PAGE 3
The Exit Page allows you exit to the Main Menu or back to the Logging Page. Press ENTER to save data and exit or MENU to back to the L1 page. Saving... L3 View data (V1-V5) Distance and Total Time (V1) Dst 00000.0 m V1 T.Time 000:00:35 Shows distance and total logging time. Start Position Page (V2) N022 31 15.9 V2 N113 23”22.11 SP The Start Position Page shows the position at the moment of logging on. If the start position data is invalid this screen will be shown. - -- -- --.V2 ---- --”--.
PAGE 4
Exit Page (P2) Exit to Menu? P2 [ENTER] The Exit Page allows you exit to the Main Menu or back to the P1 page. Specification Receiver: NEO-6M Frequency: L1, 1575.42 MHz, C/A Code Channels: 50 Sensitivity: -161 dBm (Tracking & Navigation) Accuracy: 2.5 m (GPS), 2.0 m (SBAS) Cold Start: 27 s approx.