User Manual

- Compatible with V2 and V2 pro goggles.
- New designed frame to fit the new acrylic lens.
- Detachable design similar to Quanum V2 goggles.
- Easy to assemble and remove from goggles.
- Good for mounting the battery on the goggle's headstrap behind
the user's head.
- Better balance for the goggles for placing behind the user's head.
- Better size for fitting battery size up to 77mm x 35m x 22mm.
- Extra comfortable cushions for the goggles simply cut and stick
on your goggles.
- New sponge for extra comfort.
- For top strap adjustment
a. 3.5mm female phone jack to 2.5mm male phone plug adaptor.
b. FPV DC jack to 1*5521 DC plug, 2*3315 DC plug length with
350mm.
c. 3.5mm phone female to RCA male cable with length 150mm.
d. XT60 male connector to FPV DC jack with length 210mm.
e. 3.5mm phone jack femail to RCA female cable with length
150mm.
Features:
Recommended models:
Acrylic lens set of 3 (2X, 3X and 4X magnification)
New frame for acrylic lens
Battery pouch with velcro closure and buckle
Sponge strip with double sided tape
Extension / Conversion cable
Stainless steel “S-loop”
EMPRM000412
Single lens application
Double lens application