User Manual

2) Moved display screen to outside of case and added ski goggles to back..
 On the left is the display hot glued to the foam frame.
 On the top is the attachment for the folding +5 diopter glasses.
 On the bottom you can see the cord coming out of the foam. I did this because it is less likely to have a
stress break inside the display.
 The ski goggles are hot glued to the back, have a notch cut out for the top of the folding glasses, and I
used wing edge tape from my Cessna to cover the excess openings. Wing edge tape sticks better than
any tape I have ever used.
 The tab which would normally be on the fresnel lens is now attached to the Harborfreight magnifying
glass.
3) Replaced fresnel lens with Harborfreight item #37708.
I cut off the handle of the magnifying glass and added tabs like the fresnel holder has. It is much sharper and
easier on the eyes.