User Manual

__________________________________________________________________________________
Quanum-RC.com
Quanum is bringing a more immersive experience to FPV with a new 3 axis no drift head
tracker. Quanum’s new head tracker roots are based on the widely popular DIY head tracker
project by Dennis Frie and Mark Mansur, a big thanks to those developers.
The Quanum head tracker is a refined mini single board head tracker that uses not only gyros
but a magnetometer to correct for gyro drift for a locked in, full 3 axis experience. The simple
GUI allows easy setup for servo center, end points, direction, and most importantly PPM
channel mapping. Whether you use it for single axis or the full 3 axis this configurability
allows it to be used with almost all radios with a trainer port input.
The kit comes not only with the 3 axis tracker, but cables for Futaba/9XR/9XRPRO and JR
style 3.5mm trainer ports. There is an included optional remote center button for TX
mounting and convenience. The Quanum head tracker is the perfect accessory for the
Quanum DIY V1 and V2 goggles or any other model goggles or FPV setup.
Features:
Full 3 Axis
Easy GUI setup
Compatible with most radios with a trainer port
Remote zero button
Drift free
Specs:
Size: 45x28x9mm
Weight: 9g
Voltage: 2~4s (provided via the trainer port cable on Futaba)
Axis: 3, Pitch, Roll and Pan