Installation Instructions

Glass Shade

Bulb (Included)

Glass Cover

INSTRUCTIONS

FOR ITEM: 349-6113

UANTUS

Bulb installation and spotlight head adjustment:

NOTE: Please refer to the box for the instructions on the light and track assembly.

1. Loosen glass cover from the glass shade carefully. (See Fig.1)

2. Install a bulb (Included). (See Fig.2)

a. Attach the cupule to the top surface of the helogen bulb lens. (See Fig.2-a)

b. Insert and twist the bulb (GU10 BASE MR16C BULB ONLY) into the socket by using the cupule.

c. Remove the cupule from the helogen bulb lens by pulling the knob of the cupule.

Note: Do not discart the cupule, it will be needed when replacing the bulb.

3. Restore the glass cover back to the glass shade. (See Fig.3)

Note: Adjust the spotlight head to a desired position by using the swivel.

WARNIGN: To avoid the risk of injury, be sure to turn off electrical

power while installing or servicing the spotlight.

2-a

Glass Shade

Swivel

Cupule

Knob

Fig.1 Fig.2

Fig.2-a

Fig.3