Installation Instructions

Glass Holder

Swivel

Socket Ring

INSTRUCTIONS

FOR ITEM: 349-6110 / 6111 / 6112

UANTUS

Bulb installation and spotlight head adjustment:

NOTE: Please refer to the box for the instructions on the light and track assembly.

1. Unscrew the socket ring from the glass holder. (See Fig.1)

2. Attach the glass shade to the glass holder, and then secure it with socket ring. (See Fig.2)

3. Install a bulb (Included). (See Fig.3)

a. Attach the cupule to the top surface of the helogen bulb lens. (See Fig.3-a)

b. Insert and twist the bulb (GU10 BASE MR16C BULB ONLY) into the socket by using the cupule.

c. Remove the cupule from the helogen bulb lens by pulling the knob of the cupule.

Note: Do not discart the cupule, it will be needed when replacing the bulb.

Note: Adjust the spotlight head to a desired position by using the swivel.

WARNIGN: To avoid the risk of injury, be sure to turn off electrical

power while installing or servicing the spotlight.

2-a

Glass Holder

Glass Shade

Socket Ring

Fig.1 Fig.2

Fig.2-a

2-a

Fig.3

Fig.3-a

Glass Shade

Bulb (Included)

Knob

Cupule

PAGE 1
INSTRUCTIONS FOR ITEM: 349-6110 / 6111 / 6112 WARNIGN: To avoid the risk of injury, be sure to turn off electrical power while installing or servicing the spotlight. Bulb installation and spotlight head adjustment: 1. Unscrew the socket ring from the glass holder. (See Fig.1) 2. Attach the glass shade to the glass holder, and then secure it with socket ring. (See Fig.2) 3. Install a bulb (Included). (See Fig.3) a. Attach the cupule to the top surface of the helogen bulb lens. (See Fig.3-a) b.