Installation Instructions

INSTRUCTIONS

FOR ITEM: 349-6108

UANTUS

Bulb installation and spotlight head adjustment:

NOTE: Please refer to the box for the instructions on the light and track assembly.

1. Remove the ring from the housing. (See Fig.1)

2. Pull the socket out, insert and twist the bulb (GU10 BASE MR16C BULB ONLY) into the socket.

Then carefully put them into the housing. (See Fig.2)

3. Restore the ring back into the housing. (See Fig.2)

4. Loosen the clamping screws, adjust the spotlight head to a desired position, and then tighten

the clamping screws securely.

WARNIGN: To avoid the risk of injury, be sure to turn off electrical

power while installing or servicing the spotlight.

Fig.1 Fig.2

“U” Bracket

Clamping Screw

Bulb (Included)

Ring

Housing

Ring

Socket