User's Manual

9. LED Indicator

( Details as following table)

10. Radio On-Off/Volume Control Knob

11. Accessory Jack

12. Battery Latch

13. Belt Clip

14. Accessory cover

15. Battery

16. Charge terminal

The functions of the LEDs and beeps Table

Power On The green LED flashes once, and

radio beeps ( if programmed active )

Transmitting LED glows red

Receiving LED glows green when carrier

presents.

Scanning Green LED flashes once every 1

second.

Encoding (DTMF/PTT ID/2-Tone/MDC1200)

1) LED glows red while transmitting;

2) LED glows orange when

transmission ends.

Decoding (2-Tone/MDC1200) Orange LED flashes after the

signaling is successfully decoded.

Function Key Press One beep to enable, two beeps to

disable.

Select Power Level 1W: One beep is heard;

2W: Two beeps are heard;

5W: Three beeps are heard.

Low Battery Alert LED flashes red, and radio sounds

three beeps every 30 seconds.