User's Manual

15
Removing the Belt Clip
Loosen the screw to remove the belt clip. Please refer to the operations for attaching the
belt clip.
Attaching/Removing the Battery When the Belt Clip is Attached
When the belt clip is attached to the radio, please first press the belt clip to make its
bottom up, and then attach/remove the rear cover and battery by the steps mentioned
above, as shown in Figure 7.
Figure 7
Attaching the Earpiece/Microphone
Open (not remove) the accessory cover, plug the audio accessory firmly into the
accessory jack. as shown in Figure 8
Figure 8
Note: Using the radio with audio accessory may affect the waterproof performance of the
radio.