User's Manual
6. The keypad has two modes of operation
a. CH MODE
when the radio is turned ON, press MENU button shortly, the
radio will be the CHANNEL MODE, press [ ] or [ ]
button to select the desired channel.
b. Function MODE
when the radio is turned on, press MENU button with 2 seconds,
the backlight will also be on, and the radio will be on
Function MODE .You can now set up the required options
with [ ] and [ ] button.
Keypad locked function
Press “MENU+MONI”, LCD will show " " , you can use PTT
and MONI button only, Press “MENU+MONI” again, the keypad
will be unlocked.
Scan function
Press “MENU+DOWN”, LCD will show " " , the radio will
begin to scan, When stop in the channel Scan, Press "UP+DOWN"
button and will scan in a row. Press “MENU+DOWN” again, the
scan function will be off.
SCAN
Select Function Options
Confirm
Enter
*BEEP
*DCS
*CTCSS
*DCS/CTCSS
Conversion
*
*Busy
*VOX
*Vibration
* DCS
CTCSS
* 1-9 level
* and
* 1-16 level
* and
Press
MENU
Press
MENU
To
confirm
Press
UP
or
DOWN
Squech
Lever
(1-105)
(1-105)
* and
*
* (1-50)
Function setting
1716
Radio’s operation