User's Manual
18
■ Manual Dial
Press any key from the DTMF keypad of the microphone, while holding down the [PTT],
to transmit the DTMF frequency, and the DTMF tone will be heard from the local
speaker.
Release the [PTT] to remain transmission for 2s (programmable by your dealer), press a
numeric key within the 2s to continue transmission.
■ Keypad Auto[PTT]
If the feature is enabled by your dealer, press numeric key to transmit DTMF frequency
without pressing the [PTT].
■ Store & Send
When the feature enabled, enter a pre-stored DTMF number (up to 16 digits) in receive
mode, then press the [PTT] on the microphone to initiate a call, simultaneously, the
dialed DTMF number scrolls across the LCD, and the corresponding DTMF tone is
heard.
Note:
● If you dialed a wrong number or you want to cancel the dialing, you just simply press
any key on the front panel other than the power switch to exit.
● The “D” character can be programmed by your dealer as a blank tone, that is, the “D”
tone will not be heard while transmitting, but only a delay. The delay time of the “D”
character is programmable bu your dealer.
■ DTMF Speed
6,8,10 or 15 digits per second is programmable by your dealer.
The feature is designed to reduce false decode by providing a fixed interval time
between digits Default: 10 digits per second.
■ Store DTMF Numbers
Allows you to store a DTMF number (up to 16 digits) in each of the 32 Auto Dial memory
(01~32) respectively, detailed as follows:
1. Press the [#] key on the microphone keypad, then the LCD displays “D-------”.
2. Enter the desired number (range from 0~9, A~F) via the microphone keypad. If you
want to enterA,B,C,D,E,F, please enter 2.5.8.0, *,# respectively while holding down the
[PTT].
3. Press the [#] key, the “--” is displayed following the “D” character, indicating the
location of the memory number.
4. Enter the desired memory number (01~32).
5. Press again the [#] key on the microphone keypad, then the entered number is stored
into the corresponding memory.
If you dialed a wrong number or you want to cancel the dialing, please press any key on
the front panel other than the power switch to exit.