Installation and Operating Guide

42 Operation and Maintenance
Figure 15. Inserting the Cleaning Cassette into the Drive.
❐
When the cleaning is finished the drive will automatically eject the cassette.
Remove the cleaning cassette and write the date on the label so you have a record
of how many times it has been used and when.
❐
To confirm that a cleaning was done, look at the LEDs on the front panel of the
drive. If the cleaning cycle was successful, the LEDs will be off. If the cleaning
cycle was not performed, the LEDs will continue to flash.
❐
Place the magazine onto the carriage. Close the VLS door. Press
ALT
and then
LOAD
to initiate the load procedure.