Installation and Operating Guide

Operation and Maintenance 37
❐
Place the transparent cover over the magazine and store the unit in a cool, dry
place.
Note
Removing the Magazine while a Cassette is in
the Drive
If you wish to remove the magazine but there is a cassette in the drive, do the
following:
❐
Open the VLS door.
❐
Press the eject button on the drive (see Figure 12).
❐
Close the door of the VLS. It will take about 30 seconds for the drive to unload
the tape.
❐
Press
ALT
and then
UNLOAD
. The arm will return the cassette to the magazine
slot and the VLS will move the magazine to the unload position.
❐
Remove the magazine as noted earlier.
Loading an Individual Cassette
If for some reason you need to use a single cassette, you can load it manually (this
operation is the same as loading a cleaning cassette).
❐
Unload the magazine by pressing
ALT
and then
UNLOAD
. The magazine will
move completely to the right.
❐
Open the door and remove the magazine from the carriage. (See previous
instructions).