Installation and Operating Guide

34 Operation and Maintenance
Attempting to Load the Magazine with a
Cassette Already in Drive
Random Mode:
If the cassette was loaded manually, it must be unloaded manually –
before you attempt to have the VLS load the magazine. Refer to the next section for
manual removal of a cassette. If the VLS robotics was used to load the cassette via
applications software, attempting to "load magazine" from the keyboard will fail – the
unit will remain on-line.
Sequential Mode:
If the cassette was loaded manually, it must be unloaded manually
– before you attempt to have the VLS load the magazine. Refer to the next section for
manual removal of a cassette. If the VLS robotics was used to load the cassette, the
VLS will remember and not allow a "load magazine" from the keyboard. Press
ALT
and then
ENTER
to bring the VLS back on-line.