Installation and Operating Guide

64 Diagnostics Menu
5. Waits until door is opened, then closed (because operator should have opened
door, pressed eject button on drive, then closed door).
6. Checks that cartridge in transit sensor detects presence of media (because
drive ejected cartridge).
7. Returns media to magazine.
8. Aligns second drive with cartridge window (if VLS thinks both drives contain
media).
9. Repeats steps 2 through 7.
If the VLS thinks that the drive(s) are empty it will display: “All configured drives are
empty”.
This option is usually used for diagnostics only by a trained technician.