Installation and Operating Guide

Operation and Maintenance 41
flash amber during cassette load/unload operations. Figure 14 shows a sample
cleaning cassette with the label on which to write the date of each use.
Figure 14. Representative Cleaning Cassette
Caution
DO not attempt to RE-USE or REWIND the cleaning cassette after all
the cleaning cycles (approx. 20) have been used.
❐
Insert the cleaning cassette into the drive opening (see Figure 15). The drive will
load the cassette and automatically begin the cleaning process. The cleaning cycle
may take from 2 to 3 minutes. The media status LED will flash amber during the
entire cleaning cycle.