Installation and Operating Guide

Operation and Maintenance 33

The magazine will snap into place. If you don't hear a click, make sure that the slot on

the right side of the magazine has slipped around its magazine position pin and is not

just sitting on top of it. The magazine will not load correctly in this position.

Loading the Magazine

Once you have placed the magazine on the carriage, the VLS must initiate a loading

process. During this procedure the VLS checks and maps the position of each cassette

and makes sure that all cassettes are inserted into the magazine correctly. If you are

using the sequential mode the VLS inserts the first cassette into the drive.

Note

❐

Make sure the magazine is placed correctly on the carriage.

❐

Close the door and press

ALT

and then

LOAD

. The VLS will initiate the load

magazine procedure.

Note

UNLOAD