Installation and Operating Guide

Equipment Description 25
The Loopback (LPBK) mode determines what happens when the last cassette has been
filled. If you select "Y" for "Lpbk" the designated first cassette will be loaded into the
tape drive after the last cassette has been filled and ejected. If you select "N" an error
message will be issued and the backup will stop.
Note
Diagnostics Menu
The following functions are available under the Diagnostics Menu:
•
Error Counters
•
Event Counters
•
Operation Log
•
F/W Revision
•
Serial Number
•
Position Drive
•
Position Magazine
•
Load Medium
•
Unload Medium
•
Unload Drives
For information on these options, refer to Appendix B.
Warning
We highly recommend that these diagnostic functions be used only by
a qualified service technician (or on the instruction of a qualified
technician). Some of these functions assume that the unit has been set
up correctly and thus many of the normal built-in safety checks are
turned off. Misusing these diagnostic functions without the normal
safety checks could result in improper operation (or even damage to
media or VLS).