Installation and Operating Guide

Equipment Description 23
Drive Configuration
This function lets you enable or disable which drives are on-line.
Use
LEFT
or
RIGHT
to select the drive you wish to change. Use
UP
or
DOWN
to select "Y" to put the drive on-line or "N" to disable the drive. If you
have only one drive installed, you cannot access the Drv B field.
Note
Disabling both drives is not allowed (setting "N" in Drv A or Drv B field
automatically places "Y" in the other field).
Note
On-Line Mode
Lets you select random-access or sequential-access operating mode.
When used in random-access mode, the VLS allows software selection of any cassette
in the magazine in any order. You can logically divide cassette usage to satisfy
particular data storage needs. For example, you can assign one or more cassettes to
specific data functions (such as certain directories or network servers), or you can
assign specific cassettes to individual users.