Installation and Operating Guide

Equipment Description 19
Configuration Menu Diagnostics Menu Write EEPROM Mode
Buzzer Configuration Error Counters
ErrAlarm Yes/No Event Counters
Kybd Yes/No Operation Log
SCSI ID Config Firmware Revision
Drive B (0-7) Serial Number
Drive A (0-7) Position Drive
AC (0-7) Position Magazine
SCSI Parity Load Medium
Parity Check Yes/No Unload Medium
Off-Line Time Unload Drives
Max time 1-99 min
Drive Configuration
Drv A Yes/No
Drv B Yes/No
On-Line Mode* Random / Sequential
Sequential Mode Cfg*
First (0-11)
Last (0-11)
Loopback Yes/No
*
Available only when VLS is configured as a single-drive unit.