User's Manual

Specifications Chapter 2
STT20000N Product Manual Page 15
Recommended tapes
The STT20000 SCSI minicartridge drive uses pre-written minicartridges.
Description Seagate
Travan (740 ft) (QIC-3220)
10.0 Gbyte capacity (20.0 Gbyte capacity
with data compression)
20000TT
Note.
The STT20000 SCSI minicartridge drive reads and writes the QIC-3220-MC
format. The STT20000 SCSI minicartridge drive reads but does not write
the QIC-3095-MC format.
Regulatory compliance
The STT20000 SCSI minicartridge drive complies with the regulations listed in the
following table.
Agency Regulation
CSA
C22.2, No. 950-M89
TUV & IEC-RHEINLAND
EN 60 950/IEC 950
UL
1950
Canadian Dept. of Communications
Class B
EN55022 (CISPR-22)
with additional CE Mark test req.
Class B
FCC
Class B, Part 15
Use the STT20000 SCSI minicartridge drives only in equipment where the
combination has been determined to be suitable by an appropriate certification
organization (for example, Underwriters Laboratories Inc. or the Canadian
Standards Association in North America). You should also consider the following
safety points.
• Install the drive in an enclosure that limits the user's access to live parts, gives
adequate system stability, and provides the necessary grounding for the drive.
• Provide the correct voltages (+5 VDC and +12 VDC) based on the regulation
applied—Extra Low Voltage (SEC) for UL and CSA and Safety Extra Low
Voltage for BSI and VDE (if applicable).