User's Manual

Introduction Chapter 1
STT20000N Product Manual Page 7
For more information about a particular QIC standard, contact Quarter-Inch
Cartridge Standards, Inc., c/o Freeman Associates, 311 East Carrillo Street, Santa
Barbara, California 93101.
About this manual
The remaining chapters and the appendices in this manual are briefly described in
the following table. A glossary of terms is also included.
Number Title Description
2
Specifications Contains physical, performance,
environmental, power, and reliability
specifications for the drive and
minicartridges.
3
Installation Provides cautions, unpacking tips,
inspection information, and
installation/connection steps
including cabling requirements and
connector pinouts.
4
Drive operation Explains drive operation,
maintenance and troubleshooting
5
SCSI interface Lists general information about the
SCSI interface. (See Note below.)
6
Tape format Provides an overview of the QIC-
3220-MC tape format.
7
Theory of operation Details the functional operation of
various assemblies of the SCSI
drive.
Appendix A
Glossary Defines key terms.
Appendix B
Acronyms and
Measurements
Lists the acronyms and
measurements used in the manual.
Note:
This manual provides all technical information about the STT20000 SCSI
minicartridge drive for hardware and software development and integration
except complete SCSI information on the SCSI commands themselves.
Refer to the
SCSI Minicartridge Drive SCSI Manua l
(P/N 10001652-002)
for detailed information about the SCSI interface, including a complete
command summary.