Datasheet

New York State Contract for Quantum Storage Systems and Peripherals
Group: 75010 Award: 18805 Contract: PT60948 Date of Pricelist: 6/25/09
ModelNumber PartNumber Description Proposed NY
State Pricing
SAABB-ATSH-NL20 7-00515-02
Quantum Phone Support – Hardware Products. No contract, 2hr, all zones.; 750.00$
SAABB-ATSH-RE20 7-00515-01
Quantum Phone Support – Rapid/Fast Exchange Products. No contract,
2hr, all zones.;
500.00$
SAABB-ATSS-NL20 7-00515-03
Quantum Phone Support – Software Products. No contract, 2hr, all zones.; 950.00$
SAABB-NTAM-0001 7-00475-01
Quantum On-site Time & Materials Charge, per day, zone 1; 2,500.00$
SAABB-NTAM-0002 7-00475-02
Quantum On-site Time & Materials Charge, per day, zone 2; 2,875.00$
SAABB-NTAM-0003 7-00475-03
Quantum On-site Time & Materials Charge, per day, zone 3; 4,375.00$
SAABB-NTRC-0001 7-00476-01
Quantum Out of Area Travel Charge, zone 1; 2,000.00$
X7-0/0-NDS-A MAKO-GEN3-
Q
Quantum PX720 SCSI Library, capacity not assigned, no tape drives,
standalone, 2n power, 2n fans;Includes library management, and redundant
power and fans. Includes hardware supporting a maximum of 726 LTO or
642 SDLT slots when configured with one Drive Cluster Module. Must order
one Entry (X7F-CAP-E), Intermediate (X7F-CAP-K) or Full (X7F-CAP-R)
capacity point and at least one DC200L or DC200J Drive Cluster Module
(depending on number of tape drives). If library robotics will be controlled by
host system(s) via SCSI or routed (FC470) Fibre Channel, must order one
CM210 and one or more SCSI tape drives. If library robots will be controlled
by host system(s) via Native Fibre Channel, must order one CM410 and one
or more Native Fibre Channel tape drives. Must also order one power cord
kit. Requires Installation and Configuration service.
45,018.00$
X7F-CAP-K 6440160-02
Quantum PX720 Intermediate Capacity Point, factory installed;Valid only
with order for PX720. Provides access to a maximum of 430 LTO or 382
SDLT tape slots. Must order one Capacity Point item with each Quantum
PX720 library. User assignment of load port configuration will reduce total
number of storage slots as follows (SDLT/LTO): Left Load Port activated
with 14/16 slots: Lose 14/16 slots, Right Load Port activated with 28/32
slots: Lose 0/0 slots, Both Load Ports activated with 42/48 slots: Lose 14/16
slots.
9,762.00$
X7F-CAP-R 6440160-03
Quantum PX720 Full Capacity Point, factory installed;Valid only with order
for PX720. Provides access to a maximum of 726 LTO or 642 SDLT slots
when configured with up to four tape drives. Must order one Capacity Point
item with each Quantum PX720 library. In a Full Capacity configuration, a
CC200 Card Cage Module and each DC200 Drive Cluster Module (other
than the first mandatory Drive Cluster Module) will reduce maximum slot
count by 14 for LTO or 12 for SDLT. User assignment of load port
configuration will also reduce total number of storage slots as follows
(SDLT/LTO): Left Load Port activated with 14/16 slots: Lose 14/16 slots,
Right Load Port activated with 28/32 slots: Lose 28/32 slots, Both Load
Ports activated with 42/48 slots: Lose 42/48 slots.
19,524.00$
X7F-CC200-A 6440134-02
Quantum PX720 CC200 Card Cage Module, factory installed;Valid only with
order for PX720. Required to support FC470 Fibre Channel Routers.
Includes six 6U CPCI and one 4U CPCI card slots. Reduces slot count by
14 for LTO or 12 for SDLT if the library is in a Full capacity configuration.
Maximum one CC200 Card Cage Module per library frame.
1,778.00$
X7F-DS4J 6440154-53
Quantum PX720 DLT-S4, 4Gbit Native Fibre Channel, hot-swap tape drive,
factory installed;Valid only with order for PX720. Use if tape drive will be
connected to host system(s) via Native Fibre Channel. Also order one
DC200J Drive Cluster Module with 1st, 5th, 9th, 13th, and 17th tape drive.
Maximum 20 tape drives per library frame.
12,597.00$