Datasheet

New York State Contract for Quantum Storage Systems and Peripherals
Group: 75010 Award: 18805 Contract: PT60948 Date of Pricelist: 6/25/09
ModelNumber PartNumber Description Proposed NY
State Pricing
SAABB-ATSH-NL20 7-00515-02
Quantum Phone Support – Hardware Products. No contract, 2hr, all zones.; 750.00$
SAABB-ATSH-RE20 7-00515-01
Quantum Phone Support – Rapid/Fast Exchange Products. No contract,
2hr, all zones.;
500.00$
SAABB-ATSS-NL20 7-00515-03
Quantum Phone Support – Software Products. No contract, 2hr, all zones.; 950.00$
SAABB-NTAM-0001 7-00475-01
Quantum On-site Time & Materials Charge, per day, zone 1; 2,500.00$
SAABB-NTAM-0002 7-00475-02
Quantum On-site Time & Materials Charge, per day, zone 2; 2,875.00$
SAABB-NTAM-0003 7-00475-03
Quantum On-site Time & Materials Charge, per day, zone 3; 4,375.00$
SAABB-NTRC-0001 7-00476-01
Quantum Out of Area Travel Charge, zone 1; 2,000.00$
DDY75-FDEX-011A 8-00549-001
Quantum DXi7500 Expansion Module, 11TB usable, factory
installed;Includes one 3U Expansion Module with 16 1TB drives, redundant
power and fans; and license. Provides approximately 11TB native useable
capacity with RAID 6 and one hot spare drive (factory default). Order this
item for a 1TB drive-based system to add the fifth through sixteenth
Expansion Array to the base system (after ordering the Array Module and
Expansion Module combination for the first three expansions). A second
rack must be ordered the first time this item is added (i.e., when the system
is expanded from the fourth to the fifth Expansion Module). System
maximum is four Array Modules and 16 Expansion Modules.
34,151.00$
DDY75-FDSJ-022A 8-00548-001
Quantum DXi7500 Array Module and Expansion Module, 22TB usable,
factory installed;Includes one 3U Array Module with 16 1TB drives, dual
RAID controllers, redundant power and fans; one 3U Expansion Module with
16 1TB drives, redundant power and fans; and license. Order this item for a
1TB drive-based system to increase performance and provide a large
capacity increase at the same time. Valid for the first three performance and
capacity expansions in the system. After the system has four Array Modules
and four Expansion Modules, then order Expansion Modules (factory
installed DDY75-FDEX-011A or field upgrade DDY75-UDEX-011A) for
further capacity expansion.
69,300.00$
DDY75-FRAK-002A 8-00508-001
Quantum DXI7500 40U Standalone Rack, NEMA L6-30P plug, 230VAC,
factory installed (NAM/APAC/LAM);One 40U black rack enclosure for use
with DXi7500 systems. Required and only applicable when the initial system
order includes five or more Expansion Modules. Includes
lockable/removable perforated metal front and split rear doors; solid side
panels; ventilated top panel; swivel casters; and PEM nuts for equipment
mounting. Includes power supplies, two 2U power strips for 230VAC, and
four power cords with NEMA L6-30P locking plug (usable length is 6 ft (1.8
m) if power cord exits the bottom of the cabinet for floor- or wall-mounted
power outlets or 1 ft (0.3 m) if it exits the top for overhead power outlets). If
this item is added to an initial system order, then the order must include
quantity two Quantum DX30, DX100 and DXi7500 Installation and
Configuration charges (model SDY7E-NSYN-000x).
4,200.00$
DDY75-UCBP-001A 6757507-01
Quantum DXi7500 Power Cord Extension, NEMA L6-30P plug, 230VAC,
field upgrade (NAM/APAC/LAM);Includes four 10 ft (3.05 m) power
extension cables with male L6-30P twist-lock plugs and female L6-30R
receptacles. May be used to extend the 1 ft (0.3 m) usable length when the
system power cord exits from the top of the cabinet connecting to overhead
power outlets.
203.00$