Datasheet

New York State Contract for Quantum Storage Systems and Peripherals
Group: 75010 Award: 18805 Contract: PT60948 Date of Pricelist: 6/25/09
ModelNumber PartNumber Description Proposed NY
State Pricing
SAABB-ATSH-NL20 7-00515-02
Quantum Phone Support – Hardware Products. No contract, 2hr, all zones.; 750.00$
SAABB-ATSH-RE20 7-00515-01
Quantum Phone Support – Rapid/Fast Exchange Products. No contract,
2hr, all zones.;
500.00$
SAABB-ATSS-NL20 7-00515-03
Quantum Phone Support – Software Products. No contract, 2hr, all zones.; 950.00$
SAABB-NTAM-0001 7-00475-01
Quantum On-site Time & Materials Charge, per day, zone 1; 2,500.00$
SAABB-NTAM-0002 7-00475-02
Quantum On-site Time & Materials Charge, per day, zone 2; 2,875.00$
SAABB-NTAM-0003 7-00475-03
Quantum On-site Time & Materials Charge, per day, zone 3; 4,375.00$
SAABB-NTRC-0001 7-00476-01
Quantum Out of Area Travel Charge, zone 1; 2,000.00$
D1U-SW2A-20 6512540-01
Quantum DX100 Fibre Channel Switch with 20 2Gbit Fibre Channel ports,
field upgrade;Must be ordered with ninth array in a non-factory racked
configuration (including counting the first two arrays that are included with
the base DX100 system). Not required with D1F-ERAK-B or D1U-ERAK-B
(which already include a Fibre Channel Switch). Includes two power cords
with C13-to-C14 plugs. Last order date 17MAR09.
7,000.00$
D3-16/500-C 6512501-53
Quantum DX30 Disk-Based Backup System, 8TB (raw), Optyon
Compression-Ready, without installation service;Includes one 3U controller
module with Optyon data compression card with dual 2Gbit/sec Fibre
Channel host interface ports using LC connectors, redundant power
supplies/fans, 10/100/1000 Base-T management port, and library emulation
software; one 3U storage array with single RAID controller, redundant powe
r
supplies/fans and 16 500GB SATA disk drives; two 10ft (3m) LC-to-LC
cables; and four power cords with NEMA 5-15P plugs (power cords with
different plugs must be sourced locally by the customer, if required).
Provides approximately 6.5TB usable capacity with RAID 5 and one hot
spare drive (factory default). Requires 6U rack space. Does not include
Fibre Channel cables. Installation and Configuration (SDY7E-NSYN-000x)
are required. Order D3U-CB-A to activate compression feature. Last order
date 17MAR09.
42,000.00$
D3F-EA16/500-J 6512511-53
Quantum DX30 Expansion Array, 8TB (raw), without installation service,
initial order;Add to initial order to expand the capacity of D3-16/500-C non-
factory racked system. Includes one 3U storage array with single RAID
controller, 16 500GB SATA disk drives, redundant power supplies/fans and
two power cords with NEMA 5-15P plugs (power cords with different plugs
must be sourced locally by the customer, if required). Provides
approximately 6.5TB usable capacity with RAID 5 and one hot spare drive
(factory default). Maximum four arrays (one included with base DX30 plus
three additional expansion arrays). Requires 3U rack space. The required
DX30 system installation charge SN-D1-PNx includes the base system plus
up to two additional initial order expansion arrays installed at the same time
as the system. The SN-TC-PNx Field Add-on/Upgrade Trip Charge will
apply for initial installations that include more than two additional initial order
expansion arrays. Order D1/D3U-CE-A for each expansion array to activate
compression feature (base system must have D3U-CB-A DX30
Compression Base License and Key). Last order date 17MAR09.
36,750.00$