User`s guide

Chapter 2 Getting Started
Mounting the TC2201E in a Rack
Quantum TC2201E User’s Guide 15
6 Attach the ear brackets to the TC2201E, using two of the #6-32x.312
Phillips screws on each side (as shown in
figure 10 below). Position
the front of each bracket next to the end of the TC2201E that will be
facing out of the rack (see Step 7 for more information). Tighten the
screws securely.
Figure 10 Attaching
the Ear Brackets
7 If you are mounting the TC2201E in the rack with the ports facing
inside the rack (shown in Figure 2-4) or with the ports facing outside
the rack (shown in Figure 2-5), attach the front of the mounting
brackets to the rack using two of the #M6x12 Phillips screws for the
front of each ear bracket. Tighten the screws securely.
Warning: To reduce injury or equipment damage, the mounting
brackets must be level. If the brackets are not level, the
TC2201E cannot be installed correctly