User`s guide

Chapter 2 Installation Procedures
Installing the Internal LTO-5 Tape Drive
LTO-5 Tape Drive User’s Guide 13
After mounting the internal LTO-5 Full-Height Tape Drive, proceed to
Connecting the Internal Full-Height Drive Interfaces
in the following
subsection.
Figure 6 Internal Full-Height
Ta pe D r iv e Mou n tin g Ho l e
Locations
Connecting the Internal Full-Height Drive Interfaces
As shown in figure 7, the rear panel of the internal LTO-5 Full-Height
Tape Drive has connectors for:
• 29-pin SAS SFF-8482 cable
Mounting holes