User`s guide

Chapter 7 Troubleshooting Guide
Troubleshooting Suggestions
LTO-3 Half-Height Tape Drive User’s Guide 64
HBA Preinstallation
Checks 7
Before installing the HBA, check and record your current system
configuration. For example:
Refer to your operating system documentation for specific information
on reviewing your system configuration.
After installing the SCSI HBA, restart the system. Then, ensure that the
operating system recognizes the HBA and that there are no conflicts with
other adapters.
Troubleshooting Suggestions
Computer Does Not Start 7
If the computer started and operated properly before installing a SCSI
HBA and the LTO-3 Half-Height Tape Drive, but does not start now:
1 Remove the SCSI HBA.
In the . . . operating
system,
You can find information on any currently
installed SCSI HBA by . . .
Windows 2000 1 Double-clicking
Administrative Tools in
the Control Panel
2 Clicking
Computer Management > Device
Manager
3 Clicking the SCSI host adapters listed
4 Clicking
Properties to view the Resources
tab
UNIX/Linux Viewing the boot log text file.