User's Manual

Chapter 4 Using the FTP File Server

FTP File Transfers

SDLT 600A Product Manual 77

connection. Therefore, a user cannot reconnect the root as long as the tape

is not rewound. However, a guest connection is allowed.

Several FTP commands are not allowed for a:

• Guest connection

• ACKNOWLEDGE ERROR, DELE, MKD, RMD, RETR, STOR, RNTO,

SITE DELE, SITE EJECT, SITE ERASE, SITE HEADER, SITE

PARTIAL, SITE RELEASEMEDIA, SETMEDIUMID

• Root connection while another root transfers on the same path

• DELE, RMD, RETR, STOR, RNTO, SITE DELE, SITE EJECT, SITE

ERASE, SITE RELEASEMEDIA, SITE SETMEDIUMID

Figure 74 FTP Server Root User

Connect Error Window

System and MXF Files 4 The application is designed to connect to a FTP server and to transfer

MXF files (see figure 72

). You can set up several FTP servers. The FTP

server can be a SDLT 600A or any other FTP server.

Configuration

Name — identifier of the FTP server

IP Address — network IP address of the FTP server

Note: When several root users are connected, be aware that all

operations are not allowed in parallel at the same time.

Note: If three root users are already connected, and you try to

connect as a root, you will have the following

FTP error

window (see figure 74