User's Manual

Chapter 3 Using Your Tape Drive
FTP File Transfer Troubleshooting
SDLT 600A Product Manual 42
FTP File Transfer Troubleshooting 3
This section provides troubleshooting information that might be helpful
with problems encountered when working with FTP file transfers using
the built-in FTP client and server.
Root User 3 When three root users are already connected, and you try to connect as a
root, you will have an FTP error window (see figure 74
).
Given the time out setting of the built-in FTP client, it may need some
time before the root connection becomes available.
Connecting as a guest user, it is possible to kill a root connection using a
site command:
SITE KILLROOT <SP> <root password> <CRLF>
This command allows a guest user to disconnect the root user.
In Case of a Power Failure 3 A power failure will also cause also all users to be disconnected.
On any new connection after a power failure, the following window
displays:
Figure 33 Power Failure Message
All FTP commands return an error as long as the power failure is not
acknowledged by a root user using
ACKNOWLEDGE_ERROR (see
figure 34
). The Contextual menu displays when you right-click within the
FTP client pane.
Caution: Before attempting such an operation, we encourage you to
report your intention to the root user.