User's Manual

Chapter 2 Installing Your Tape Drive
Managing the Tape Drive
SDLT 600A Product Manual 16
Figure 10 Internet Protocol
(TCP/IP) Properties
5 Launch a Web browser (Internet Explorer, Netscape, or Firefox).
For other configurations, refer to Sample Configurations for Linux
and Mac OS X.
Multiuser Connection 2 The system allows six users to be logged on at a time to the SDLT 600A.
Although six users may be logged on, only three root users can connect at
a time from a single IP address. All other users are considered guests. A
root user can operate all the features of the SDLT 600A, while the guest
user can only read the cartridge directory (file system table of contents).
Note: For Linux — Configure using the following:
ifconfig eth0:1 10.10.10.1
For Macintosh — Configure using System Preferences,
Built-In Ethernet, and Manually 10.10.10.10.
Note: If you require additional assistance when changing IP settings,
you may need to consult either your network administrator or
an authority on IP policies and standards.
Note: Any change to the IP address could result in the loss of the
device. Always check that the IP address is entered correctly.
Enter the IP address and
Subnet mask