User's Manual

Chapter 2 Installing Your Tape Drive
Managing the Tape Drive
SDLT 600A Product Manual 15
Windows Configuration 2
The host IP configuration may have to be modified to communicate with
the drive.
The following steps can be used to setup and communicate with the
SDLT 600A tape drive:
1 Go to
Network Connections and click the LAN icon.
2 Go to
Internet Protocol (TCP/IP) connection and click Properties (see
figure 9
).
Figure 9 Local Area
Connection Properties
3 In the General dialogue box (see figure 10), select the radio button Use
the following IP address
.
•In the
IP address box, enter 10.10.10.1
•In the Subnet mask box, enter 255.255.255.0
4 Click OK.
Note: The factory default IP address for the SDLT 600A is set to
10.10.10.10.
Select the TCP/IP
connection