User's Manual

Appendix A SDLT 600A Tape Drive Specifications

Functional Specifications

SDLT 600A Product Manual 109

Current and Power

Requirements

The tape drive draws the highest current (and power) during the native

write modes.

Standby is measured with the tape loaded and tensioned or

untensioned, and

Idle is measured with power on with no tape loaded.

(The power drawn in these two modes is similar enough that they are

listed together.)

Application X,Y,Z axes, twice in each axis (once in each

direction)

Vibration

Type Sine Sweep

Frequency Range 5 to 500 to 5 Hz Upward and downward

sweep

Acceleration Level 0.25 G

0.010" DA

Between 22 and 500 Hz

Between 5 and 22 Hz

(crossover)

Application X,Y,Z axes Sweep rate = 1.0 octave/

minute

Note: In table 11, the current and DC power values pertain to the

internal tape drive, while the AC power values apply to the

tabletop tape drive.

Shock