User's Manual

Chapter 4 Using the FTP File Server
Supported FTP Commands
SDLT 600A Product Manual 82
Supported FTP Commands 4
To take full advantage of the SDLT 600A tape drive capabilities, you must
have an FTP client that allows you to send SITE commands.
The following FTP commands are supported by the SDLT 600A:
• Standard Commands (RFC959)
: ABOR, CDUP, CWD, DELE, HELP, LIST,
MKD, MODE, NLST, NOOP, PASS, PASV, PORT, PWD, QUIT, REST, RETR,
RMD, RNFR, RNTO, SITE, STOR, STRU, SYST, TYPE, and USE
R
• RFC775 Commands
: XCUP, XCWD, XMKD, XPWD, and XRMD
• SITE Command
s: ACKNOWLEDGE_ERROR, DELE, EJECT, ERASE,
ESSTYP, FREE, FSIZ, FTYP, GETMEDIUMID, HELP, HDR2XML, HEADER,
IDLE, MEID, MXFNFO, PARTIAL, RELEASEMEDIA, SETMEDIUMID, TC,
TIME, and VERSION
• Commands Not Normalized (Internet Draft)
: FEAT and SIZE
Standard Commands
(RFC959)
4
The following RFC959 standard commands are supported:
Command ABOR
Syntax abor <CRLF>
Parameters N/A
Purpose aborts a file transfer (STOR or RETR).
Command CDUP
Syntax cdup <CRLF>
Parameters N/A
Purpose equivalent to "cwd .."
Command CWD
Syntax cwd <SP> <pathname> <CRLF>
Parameters - <pathname>: an existing relative or absolute directory.
Purpose This command allows the user to work with a different directory.