User's Manual

Appendix A Basic Information Logs
SuperLoader Logs
236 SuperLoader User’s Guide
Soft Logs 1 Soft logs record the SuperLoader’s history during different conditions.
They are similar to hard logs but may have been overwritten by a
recovery action.
Update Logs 1 Update Logs record firmware changes and upgrades in the SuperLoader.
An update log also records when hardware is updated or changed.
Shadow Event Log 1
Shadow logs record the picker EEPROM used only at Quantum
Engineering. Shadow logs appear differently than the other logs (see
figure 121
).
Code
Description
D2-D4 Position Sensor Bad
D5-DE Cartridge flags located on the magazine may be bad or the sensor to detect
the flags may have a problem
DF Jammed Cartridge
Software
Location ID
Defines a location in the firmware internal to the task being performed.
This ID is used by firmware engineering to identify what part of the actual
firmware task detected the event.
Note: There are no important fields in the Shadow Event log. This
log is used only at Quantum Engineering.
Field Description