User's Manual

Preface
xx SuperLoader User’s Guide
Purpose The purpose of this manual is to provide end users with the following
information:
• SuperLoader description and specifications
• SuperLoader installation and configuration
• Tape cartridge description and general overview
• SuperLoader operation
• Troubleshooting
Document
Organization
This manual is organized as follows:
• Chapter 1, Introduction
- This chapter provides a general overview of
the SuperLoader’s components and functionality.
• Chapter 2, Installation and Configuration
- This chapter describes
how to unpack, install, configure, remove, and repack the
SuperLoader.
• Chapter 3, Tape Cartridge Use
- This chapter describes tape cartridge
care and usage.
• Chapter 4, SuperLoader Operation
- This chapter describes the
components of the SuperLoader, setting passwords, setting modes,
loading cartridges, installing magazines, and testing the
SuperLoader’s functionality.
• Chapter 5, Troubleshooting
- This chapter describes how to
determine and repair minor and major problems that may occur in
the SuperLoader. It also contains information relating to the error and
event logs.
• Chapter 6, Diagnostics
- This chapter describes the Power-On Self
Test (POST) and diagnostic tests for testing the SuperLoader’s
functionality and for troubleshooting errors.
• Appendix A, Basic Information Logs
- This appendix describes the
logs for the SuperLoader and tape drives. It contains a description of
each log type including log block descriptor and field descriptions.
• Appendix B, Specifications
- This appendix describes the
SuperLoader’s specifications.
• Appendix C, Time Zones
- This appendix provides a listing of Time
Zones for setting the time on the SuperLoader.