User's Manual

Chapter 5 Administration
Setting Magazines
Quantum SuperLoader 3 User’s Guide 79
Setting Magazines
In some cases, autoloader owners were being charged Independent
Software Vendor (ISV) licensing fees for two-magazine SuperLoader 3s
although only one magazine was configured. This occurred because the
ISV software was registering the autoloader as a two-magazine device,
regardless of the number of magazines configured. You have the ability
to set the number of magazines in the autoloader.
To set the number of magazines:
1 From the main menu, scroll to
Configuration, and then press Enter.
2 From the
Configuration menu, scroll to Magazines, and then press
Enter.
3 From the
Magazines menu, select either Right, Left, or Both to indicate
the magazines installed in the autoloader.
Setting Passwords
Many operations on the autoloader are password-protected to ensure
data integrity. You can set passwords to administrator level and to
operator level. Operator-level users have access to the
Commands and
Status menus. Administrator-level users have access to all functionality.
To set a password:
1 From the main menu, scroll to
Configuration, and then press Enter.
2 From the
Configuration menu, scroll to Set Password, and then press
Enter.
3 To set a password to the operator level, scroll to
Operator. To set a
password to the administrator level, scroll to
Administrator, then
press
Enter. The Set Password screen appears.
4 Press
Enter. If you are not logged in as Administrator, press Enter
again to log in. A text box appears above the first asterisk.