User's Manual

Chapter 5 Administration
Setting Security
Quantum SuperLoader 3 User’s Guide 78
Setting Security
You can add security to the front panel by password-protecting the
autoloader's functionality. The security setting only protects the front
panel functionality. The default setting is
Off, meaning that no password
is required. However, you can enable the security option so that users
must enter a password to access functionality.
When you first power on the autoloader, the security option is set to
Off.
Use the following procedure to enable the security option. You must have
an administrator-level password to set passwords.
To set the security option:
1 From the main menu, scroll to
Configuration, and then press Enter.
2 From the
Configuration menu, scroll to Security. If a check mark
appears after the word, the security option is
On. If no check mark
appears, the security option is
Off.
3 To change the option, press
Enter. For example, if the security option
was set to
On, it is now set to Off, and no check mark appears.