User's Manual
Chapter 4 On-board Remote Management
Diagnostics Page
Quantum SuperLoader 3 User’s Guide 62
Diagnostics Page
From the Diagnostics page, you can run various tests on the autoloader.
You can also view error and history logs, test progress, identify the
physical unit in a rack, or reset the system.
Running Diagnostic
Tests 4
You can perform the following diagnostic tests from On-board Remote
Management:
•Loader—Picker Test
• Loader—Magazine Test
• Loader—Inventory Test
• Random Moves
Viewing Error or History
Logs 4
To view error or history logs:
1 From any page, click the
Diagnostics heading. The Diagnostics screen
displays.
2 Under
View Error and History Logs, click View Logs. You can also save
the logs to a file by clicking
Save Logs. If you save the logs to a file,
you must select a destination folder within 60 seconds.
Note: On-board Remote Management allows you to request all
diagnostic tests, but any tests that require a cartridge to be
inserted will time out unless someone manually inserts the
cartridge at the appropriate time.
Note:
View Logs allows you to view a summary of the hardware,
software and update logs for the autoloader.
Save Logs saves detailed log information to a file for the
autoloader. On some browsers, after saving logs, it may be
necessary to click on
Home to continue using the On-board
Remote Management function.